Our specialist range of showering/toileting chairs are distinguished by their high quality, safety and practical design.  All standard chairs have been weight tested to 200kg, (30 stones), and increased weight capacity is available to special order.

Unless otherwise specified, your chair will be supplied as follows

STEP 4 - Select your Armrest

STEP 3 - Select your Backrest

STEP 1 - Select Your Frame

Choose your model from the range above, and select the seat width required - "A" - 540mm (21")    "B" - 490mm (19")    "C" - 440mm (17")

Com models of the T40 and T70 are available to fit over automatic bidets such as Clos-o mat and Geberit. They have horizontal frames and seat skirts as standard, with no pan sliders

Transportable Option

STEP 5 - Select your Footrest

STEP 2 - Select your Seat

First, which type of seat.

 

 

 

When horseshoe or aperture seats are ordered, either small, medium or large aperture sizes should be specified.

STANDARD INTERCHANGEABLE COMPONENTS

With special shaped frame and seat, this model is designed to ease access to underneath of chair from either side.  Supplied with special large horseshoe seat only

All chairs are available as a Transportable Option, so that the  frame can be easily dismantled without the need for tools, for ease of transport or storage.

Accessories

Choose from any of the following, which can be ordered to fit any new or existing chair in the range.

Although the above specifications are supplied when no variation is requested, the vast majority of our chairs are supplied with one or more of our standard variations.  The process of specifying your individual model is very straightforward

The substantial steel frame is constructed of heavy tubing, which then undergoes a unique process to produce a highly durable and extremely attractive finish.  The nylon coating is tough, resilient and waterproof, with a glossy attractive finish.

Seats and backrests are covered in hard-wearing flame-retardant material, which is hygienic and wipe-clean.  Large diameter top quality plastic castors provide maximum water resistance, and easy travel over uneven surfaces and the ramped edges of shower cubicles.

The range is extensive with a model to suit every application.  All chairs fit over a standard toilet or commode.  An assistant propelled or self-propelled model is available as standard for use with automatic bidets.

The chair is in modular form, with a large range of standard options in seats, backrests and armrests, all interchangeable on different models.  The comfortable padded seats are available in fully padded, horseshoe-shaped or aperture-type configurations, and are available extended for additional support.  Armrests are covered in comfortable and hygienic high-performance dense foam in a choice of 3 different widths.  There is a choice of horizontal push handles or straight, vertical handled backrests for use in restricted areas or over WCs.  In most models, swing-away footrests are standard.

Every model is manufactured to three different width fittings - 440mm(17") 490mm(19") and 540mm(21").  With such a wide range of options, a standard chair can be selected to suit most requirements, avoiding the need for an individual build.  However, for special needs, there is a full assessment, and custom build service. 

All models carry a twelve-month warranty.

STANDARD MODELS

Waist strap Buckle or Velcro

Full Harness

Ankle Strap

Calf Support

Pommel  

Commode Pan

for aperture seats

ABS Foot Tray

Can be fitted with toe straps

Clip-on Padded Foot Tray

Individual Clip-on Padded Foot Trays

Soft Armrest Tops 60mm or 90mm wide

Only available when ordering new armrests

Extended Brake Levers

Only available when ordering new

25mm, 50mm or 75mm Clip-on padding for backrests or armrests

A = Height, B = Width, C1 = Length including footrests (if fitted) at lowest position, C2 = Length including footrests (if fitted) at highest position,  D = Width of standard seat,  E = Height to top of seat,  F = Height Clearance,  G = Depth (standard seat),   H = Top of armrest to top of seat,  I = Width clearance,   J = Top of backrest to seat, K1 = Distance between armrests at rear,  K2 = Distance between armrests at front

Recliner Chair - Model T80

Footrest sleeves can be fitted for sensitive feet

 A1= Height without detachable headrest, A2 = Height with detachable headrest, B = Width, C1 = Length in upright position, C2 = Length with maximum recline,  D = Width of standard seat,  E = Height to top of seat,  F = Height Clearance - nb, this can be raised by 25mm by having seat with no commode pan sliders,  G = Depth (standard seat, - 50mm and 75mm extended seat available),   H = Top of armrest to top of seat,  I = Width clearance at bowl height,   J = Top of backrest to top of seat (without optional detachable headrest - with headrest add 300mm, K1 = Distance between armrests at rear,  K2 = Distance between armrests at front

To return to the Shower Chair page, CLICK HERE

To return to the Commode Chair page CLICK HERE

 

Specifications